Pureco Stain & Glaze - Driftwood
Our Stain & Glaze is water based, translucent, matte finish, self sealing and easy to use.
To use as a glaze – wipe or brush on over detailed areas, appliques and carvings. Before it dries take a slightly damp cloth and wipe away from the raised areas, leaving the glaze in the detailed areas.
To use as a stain – using a lint free cloth or wide brush, smoothly apply thin layers of stain to your prepared raw wood, using long smooth strokes with the grain of wood. Wipe away excess with a slightly damp cloth.
Our Stain & Glaze are translucent so layers can be built up to create a more opaque finish if desired.
How to use
Ensure your painted piece is dry or your raw wood is clean and dry.
Stir our Pureco Stain & Glaze well
Can be applied with a brush or lint free cloth
Applying as a Stain or Glaze use thin light coats, wiping off excess with a slightly damp lint free cloth, before it dries.
Apply extra coats to build up the colour, wiping back as you go.
When using as a Glaze if it looks too dark try dry brushing over lightly with your paint colour.
Allow 8 hours to fully dry before using any sealers or oils over the Pureco Stain & Glaze.