Chalk Finish - Rainforest
Matte, velvety, self-levelling. The perfect choice for vintage shabby chic, distressed & rustic textured looks.
How To Use -
Clean substrate, sand flaking paint off, lightly scuff shiny surfaces to promote adhesion.
Paint, glaze, wax or seal.
Always do a test patch to see if this product is right for your project.
Apply a coat with a broad brush, spray or roller. If spraying, thin with water as necessary. Our product can be thinned up to 30%.
Allow your first coat to dry thoroughly before applying your next coat.
For a smooth finish, use a smooth flat brush in long smooth strokes and water mister, you can sand lightly in between coats for a super smooth finish also use our liquid wax or hemp oil with wet & dry sandpaper to finish as a sealer.
For a textured rustic look, use criss cross brush strokes with a round or oval brush to give your piece added interest, any of our sealers can be used. In some cases, you may find some substrates may have tannin bleed-through. Should this happen, use our base & blocker to prevent further staining.
Seal with either our Beeswax Polishes, Liquid Wax, Hemp oil or any of our Sealers.
200ml will cover approx 2-3 square metres and 600ml will cover approx 7-8 square metres in normal conditions. This will definately depend on the colour choice, whites will require more coats hence cover less square metres.