Pureco Chalk Finish Paints

Chalk Finish - Brick


Regular price $8.00
Chalk Finish - Brick

santa fe architecture and rusty old gates.

Matte, velvety, self-levelling. The perfect choice for vintage shabby chic, distressed & rustic textured looks.
 
How To Use -

Clean substrate, sand flaking paint off, lightly scuff shiny surfaces to promote adhesion.

Paint, glaze, wax or seal.

 Always do a test patch to see if this product is right for your project.

 Apply a coat with a broad brush, spray or roller. If spraying, thin with water as necessary. Our product can be thinned up to 30%.

 Allow your first coat to dry thoroughly before applying your next coat.

 For a smooth finish, use a smooth flat brush in long smooth strokes and water mister, you can sand lightly in between coats for a super smooth finish also use our liquid wax or hemp oil with wet & dry sandpaper to finish as a sealer.

 For a textured rustic look, use criss cross brush strokes with a round or oval brush to give your piece added interest, any of our sealers can be used. In some cases, you may find some substrates may have tannin bleed-through. Should this happen, use our base & blocker to prevent further staining.

Seal with either our Beeswax Polishes, Liquid Wax, Hemp oil or any of our Sealers.

 200ml will cover approx 2-3 square metres and 600ml will cover approx 7-8 square metres in normal conditions. This will definately depend on the colour choice, whites will require more coats hence cover less square metres.

Related Products